|
Here we have a storage
bowl for the kitchen for assorted bagged teas. The copper PLA
filament from CC3D was used, and prints identically to the gold
and silver filaments we have also tried. The material is brittle,
and needs 215 degrees C for the temp. It tends to foam out as
it prints, hiding small details. But the color and shine is the
best in the industry, so we put up with its nuances.
Click on thumbnails
below for larger view:
 |
3D
Cad model in Solidworks. Essentially, you draw a sphere, chop
its top off and add the brim ring. The bottom is flat as well.
Then you use the shell command to hollow it out. |
 |
Finished
print! Looks nice in the sun. |
 |
Final
Tea Bowl in use in the kitchen! |
|
